FLAPERON ASSEMBLY (CONTINUE)

INBOARD LEFT FLAPERON

Hinge Bracket

Flaperon Full Rib

Cleco pliers

Cleco with #30 and #40

The Hinge Bracket was positioned on the Spar against the Nose Rib. The top edge of the Hinge Bracket should be at the start of the radius on the Spar. The Hinge Bracket was clamped to the Spar and Nose Rib.

The Full Rib was clecoed to the bottom of the skin but not for every hole.

The hole was clecoed with #30 cleco before the drilling process to expand the hole with #40 cleco.

After completing the drilling process, clecoed the hole using cleco pliers.

Later, the hole was replaced with #30 cleco.