4 July 2011
INBOARD LEFT SLAT ASSEMBLY
 The corner ribs are clecoed and drilled with 30 size along the slat.png)
The corner ribs were clecoed and drilled with #30 drill bit along the Slat part.
 the top rib and top skin are examined to fit with the pilot hole and are drilled with 30 size.png)
The top Rib and the Skin were examined to fit with the pilot hole and were drilled with #30 drill bit.
 the top rib are drilled using 30 size. then, the top skin is clecoed along the pilot hole line that are located at the aft slat and drilled space (selang).png)
The top Rib was drilled using #30 drill bit. The top Skin was drilled in equal spacing and then, clecoed along the pilot hole line located at the aft Slat.
 cleco the hole that have been drilled with 30 size.png)
Clecoed the hole with #30 Cleco.
 bottom skin is clecoed and drill along the aft slat pilot hole line.png)
The bottom Skin was clecoed and drilled along the aft Slat pilot hole line.
 Grip pin is ready to be removed.png)
Grip pin was ready to be removed.
 Finished product.png)
The completed assembly after clecoing.