FLAPERON ARM, TRAILING EDGE SKINS & WING ROOT TOP SKIN ASSEMBLY ( LEFT WING )

The Flaperon Arm and the L angle were cleco to the Rear Rib. The holes in

the L angle was back drilled into the Rear Skin.

The Trailing Edge Skin height was set at 70mm from the top of the Flaperon Arm

to the center of the radius of the Trail Edge Skins.

With a #40 drill bit, the Top Skins drilled back through in the Trailing Edge Skins

and Rear Channels. The holes was expanded with a #30 drill bit.

The Wing Root Top Skin was deburr.