20 July 2012
FORWARD FUSELAGE
The 150mm L-angle (left side fuselage) is gripped with grip pin to the left seat support. A red line is marked on the edge of the L-angle.
The L-angle is then distach from the seat support leaving one grip pin attacking the L-angle to the gear channel.
With #40 drill bit, the L-angle is drilled through the gear channel.
Then, the holes are then enlarged to final size, #30 with #30 drill bit.
Then, with #30 drill bit, 4 holes are enlarged through the left seat support and L-angle.
We started to work on the right side fuselage.
We distached the L-angle from the seat support learning it to attached with the gear channel with clecoes.
The 5 holes are then enlarged to #30 size using #30 size drill bit.
Then, we have enlarge the L-angle through the right side seat support with #30 drill bit to #30 size holes.
We then cleco the L-angle to the right seat support. We have finished work on this section.
- Hits: 4