23 July 2013

FUSELAGE JOINING & FORWARD FUSELAGE SECTION

As for today, we will start to assemble all the parts after the primer are well dry. So, for today, we will assemble the  Rudder Pedal with all associated parts as picture below

As shown in the picture, the Toe Brake Pedal and the Piano Hinge are primered

As shown in the picture the Rudder Pedal are assembled

Then we move on to assemble the parts on the Rudder Controls

Next, we move on to assemble the Seat Channel and both L-angles on its sides

Next, we assembled the parts on the Gear Channel

As shown in the picture above, we also assembled the L-angle to both Seat Support

Next, we clecoed the Both Arm Rest Side and Inboard Seat Belt Attachment

As shown in the picture, we will start to do rivet on these holes

As picture above, it is shown we have riveted the Gear Channel Doubler (75F10-2) to the Gear Channel, 75F10-1 on both front and aft side

Next, we riveted the other sides of the Gear Channel Doubler