11 September 2013

FUSELAGE JOINING & FORWARD FUSELAGE SECTION

Today, we have started to rivet both Side Channel, 75F4-1 to the Side Channel Cover 75F4-2, for the passenger and pilot side.

As shown in the pictures above, we have riveted the Side Channel to The Side Channel Cover on both of passenger and pilot side with A4 rivets.

Then, we continue to rivet the Seat Channel, 75F11-1 to the bottom fuselage with A4 rivets as shown in the pictures above. No issue on the riveted parts.

Then, we continue to rivet on the Floor Stiffener, 75F10-4, to the bottom fuselage with A4 rivets.

Next, we continue to rivet along the Seat Support on the Passenger Side to the bottom fuselage and the Gear Channel with A4 rivets.

Next, we continue on to rivet along the Seat Support on the Passenger Side to the bottom fuselage and the Gear Channel with A4 rivets.

Now we continue on to rivet the L angle on the Gear Strut Fittings and the Gear Channel as shown in the picture. The position is on the Pilot Side. We will continue the process on the next task/log.