17 May 2013

FUSELAGE JOINING & FORWARD FUSELAGE SECTION

Today we are ready to rivet the Bottom of the Rear Fuselage from the Firewall Rivet line to the Horizontal Tail area.

This is the Bottom Fuselage ready to be rivet.

Ready to be rivet with A4 rivet. On this area, we have accidentally drilled the hole staggered with A4 and A5 rivet. We have contact the Technical Support and the explained to us that it is fine to have it this way. So the Left Side of the Fuselage is riveted staggered between A4 and A5. Such as, the rivet that is ready to be riveted is A4 and the Clecos are A5. Therefore, after the A4 rivets has been riveted, the A5 rivet will be riveted staggered.

The bottom left side of the fuselage has been riveted with A4 and A5 rivets.

More close up from the aft.

And now we look on the Right Side of the fuselage. The Bottom if the Fuselage is ready to be riveted.

Picture showing the Bottom of the Right Fuselage is riveted with A4 rivets.